Supplied on the wheels, the first number is the quantity of the moving sections, the letters are the type of the drive: Ã-comb, Â-screw, Ý-electric jack (marking from the head section) Functional bed ÊÔÒ – 3 ÂÂÃ/Ã allows you to create the necessary conditions for treating and preventive activities, also it is very comfortable for the staff during the patient care. The bedding has four sections: back, hip, foot and intermediate. The section can be horizontally regulated: - Back section 0 -75 degrees (screw)
- Intermediate 0 – 60 degrees (screw)
- Foot 0 – 30 degrees (lever)
The bedding sections are made of a square pipe 25x25 and welded grid made of wire 5mm diameter, cell 100x500 mm. The bedding support on the power rack is carried out through the gasket. The back part of the bedding can be raised by the screw device. The hip part of the bedding – is fixed and rigidly attached to the power rack. The intermediate section of the bedding actuates from the side of the footboard by the screw device which made of steel and bronze and has an overload protection (antivandal screw). The Foot section starts to move at the same time with the intermediate section by the steel lever, connecting the foot section and the power rack. All the metal parts of the bed are painted with white polymer-powder paint. The bed has four corner bumpers and is completed with the hydraulic drive for raising and lowering the bedding. Sizes: 2120x950x400-550 Max load - 180 kg Mass of the bed no more than 80 kg Basis: steel, polymer-powder coating. Supplied in disassembled form without the mattress. | 
