The two-section functional bed КФ-«Техстрой 4» (КФТ-1Г/Г)

The beds are supplied on the wheels, the first number is the quantity of the moving sections, the letters are the type of the drive: Г-comb, В-screw, Э-electric jack (marking from the head section)

Functional bed КФТ - 1Г/Г   allows you to create the necessary conditions for treating and preventive activities, also it is very comfortable for the staff during the patient care.

The bed consists of basis (power rack), bedding, and two backs.

Basis: Steel, polymer-powder coating.

The Bedding: consists of two sections, which hinged connected to each other.

The sizes of the bedding:

• Head section – 740 mm
• Foot section 1170 mm

The sections are made of square pipe 25x25and welded gauze made of wire with the diameter of 4 mm, cell 100x50 mm. Bedding support on the power rack is  carried out through the polyethylene gasket. The back part of the bedding starts to move with the help of comb (Rastomat). The height regulating of the mattress basis is hydraulic by two foot pedals on the both sides of the bed. The legs of the bed are attached to the power rack with the help of pair plates 110x50 mm, thickness 4mm, with the holes (protects from the moving of connections), steel threaded sleeves are welded inside the basis of the leg. Four swiveling wheels with the diameter of the 125 mm, are attached to the basis. Two of the wheels have brakes. Wheels are made of grey trackless rubber, produced by “TENTE”. 

Horizontal regulation of the section:

-Back section 0-75 degrees (comb, Rastomat)

Backs: In the head and foot parts of the basis there are two backs attached with the insertions made of chipboard, thickness 16 mm. The attachment mechanism of the backs allows to remove and install them easily (Quick-detachable).

The bed has four corner bumpers and six limiters of the mattress in the end parts of the bed and on the head and foot sections (at the edges)

• Mass of the bed not more than 68 kg
• The height of lying: 550-820 mm.
• Overall dimensions: 2100x965x1085-1350 mm.
• Max load – 200 kg

Standard color: white

Additional equipment: dropper stand, set of the side rails, stand for the bedpan, Balkan frame, traction frame, the mattress for the one-section functional bed.

THE FUNCTIONAL BEDS КФ-"Техстрой 4" (КФТ) 

THE FUNCTIONAL BEDS КФ-"Техстрой 5" (КФС) 

THE FUNCTIONAL BEDS КФ3-"Техстрой" (КФТС)

THE FUNCTIONAL REANIMATION BEDS