The four-section functional bed КФ-«Техстрой-4» (КФТ – 3 ВЭГ)

Functional medical four-section beds are supplied on the wheels, the first number is the quantity of the moving sections, the letters are the type of the drive: Г-comb, В-screw, Э-electric jack (marking from the head section).

The bedding consists of four sections which hinged connected to each other: back, hip, intermediate, foot. The basis is made of round pipes with the diameter of 22 and 38 mm, and profile pipe 40x25 mm. The legs of the bed are made of the pipe with the round section and with diameter of 38 mm. The legs are attached to the rack with the help of pair plates 110x50mm, thickness 4mm, with the holes (protects from the moving of connections), steel threaded sleeves are welded inside the basis of the leg. The sections are made of square pipe 25x25 and welded grid made of wire with the diameter of 5 mm, cell 100x500 mm. Bedding support on the power rack is carried out through the polyethylene gaskets.

Horizontal section regulating:

• Back section 0-75 degrees  (screw)
• Intermediate section 0-60 degrees (Electro drive ILCON)
• Foot section  0-30 degrees (comb, RASTOMAT)

• The back part of the bedding rises with the help of the screw mechanism which is made of steel and bronze and has the protection from overload (antivandal screw).
• The hip part – is fixed and rigidly attached to the power rack.
• Intermediate section activate with the help of electro drive ILCON made in Germany with the remote control. Electro drive works from single-phase AC 50Hz with rated voltage of 220V and is designed for short-term deviations of the supply voltage + 10% from the nominal value. Electro drive is equipped with a battery and in case of accidental power outage can transform the bed into its original position.
• The foot part of the bedding starts to move at the same time with the intermediate section by the steel lever, by which foot section and power rack are connected.

Dimensional sizes of the bedding:

• Head section – 740x840 mm
• Hip section – 270x840 mm
• Intermediate section – 350x840 mm
• Foot section – 460x840 mm

Basis: steel, polymer-powder coating. Supplied in unassembled form without the mattress.

Additional equipment: dropper stand, set of the side rails, stand for the bedpan, Balkan frame, traction frame, the mattress for the three-section functional bed.

• Overall dimensions: 2100x965x1080 mm.
• Mass not more than 68 kg
• Package amount 0.4 cbm
• The height of lying 550 mm

  THE FUNCTIONAL BEDS КФ-"Техстрой 4" (КФТ) 

  THE FUNCTIONAL BEDS КФ-"Техстрой 5" (КФС) 

  THE FUNCTIONAL BEDS КФ3-"Техстрой" (КФТС)

  THE FUNCTIONAL REANIMATION BEDS                    

  THE FUNCTIONAL OBSTETRIC BEDS