Functional Bed КФС - 1В is for to create necessary conditions for the medical and prophylactic activities, and for the convenience of service staff during the patient care.

Functional Bed has one mobile section

The bed consists of a base (power frame), a bed, two backs, and drives. The base is made of round pipes of 38 and 22 mm in diameter and profiled pipes of 40x25 mm. Four pintle wheels with the diameter of 125 mm are fastened to the base of the bed, Two of them are with brakes. The wheels are made of gray rubber, leaving no traces. In the head and foot part of the base the backs with inserts from laminated wood chipboard are mounted. The mechanism of backs attachment lets quickly to lift and install them (quick back).

Bed consists of two sections which are connected hingedly: back, coxal. Adjustment of sections to the horizontal:

Back  section of 0 - 75 degrees (the screw with protection against overloads)

Sections of the bed are made of square tubes of 25x25 and welded wire grid with a diameter of 5 mm., the size of a cell is 100x50 mm. A bed supports to a frame comes through the polyethylene pads. Back part of the bed can be lifted with screws. The coxal section of the bed is fixed and firmly hitched to the power frame. All metal parts of the bed are painted with white polymeric-powder paint. The bed has four corner bumpers.

Maximum load - 200 kg

 The height of lying – 550 mm

The mass of the bed not more than - 68 kg

Package amount 0.4 cbm

Overall dimensions: L - 2100. W - 965 H - 1080.

Additional set: rack for a dropper, side fences, support under a bad-pan, Balkan frame, mattress for a functional One sectional bed

THE FUNCTIONAL BEDS КФ-"Техстрой 4" (КФТ) 

THE FUNCTIONAL BEDS КФ-"Техстрой 5" (КФС) 

THE FUNCTIONAL BEDS КФ3-"Техстрой" (КФТС)

THE FUNCTIONAL REANIMATION BEDS