Functional Bed КФС - 1Э

Beds are delivered on wheels, the first figure is the number of mobile units, and letters are the type of drive: Г - comb, В - Screw, Э - electric lift (marked from the head section)

Functional Bed КФС - 1Э is for to create necessary conditions for the medical and prophylactic activities, and for the convenience of service staff during the patient care

Functional Bed has one mobile section

The bed consists of a base (power frame), a bed, two backs, drives. The base is made of round pipes of 38 and 22 mm in diameter and profiled pipes of 40x25 mm. Four pintle wheels with the diameter of 125 mm are fastened to the base of the bed; Two of them are with brakes. The wheels are made of gray rubber, leaving no traces. In the head and foot part of the base the back with inserts from laminated wood chipboard are mounted. The mechanism of backs attachment lets  quickly lift and install them (quick back).

Bed consists of two sections which are connected hingedly: back, hip. Adjustment of sections to the horizontal: Adjustment of sections to the horizontal:

Back section of 0 - 75 degrees (electrodrive «ILCON»).

Sections of the bed are made of square tubes of 25x25 and welded wire grid with a diameter of 5 mm., the size of a cell is 100x50 mm. A bed supports to a frame comes through the polyethylene pads. Back part of the bed is raised with the help of electric drive ILCON with a remote control panel. Electric drive works from the network of alternating current at a frequency of 50 Hz with a nominal voltage of 220V and is for short-term deviations of the supply voltage + 10% of the nominal value.

The hip section of the bed is fixed and firmly hitched to the power frame. All metal parts of the bed are painted with white polymeric- powder paint. The bed has four corner bumpers.

• Overall dimensions: 2100x965x1080
• Maximum load - 200 kg
• The height of lying 550 mm.
• The mass of the bed not more than - 68 kg
• Package amount 0.4 cbm
• Term of service - 10 years

Additional set: rack for a dropper, side fences, support under a bad-pan, traction frame, Balkan frame, mattress for a functional one sectional bed

THE FUNCTIONAL BEDS КФ-"Техстрой 4" (КФТ) 

THE FUNCTIONAL BEDS КФ-"Техстрой 5" (КФС) 

THE FUNCTIONAL BEDS КФ3-"Техстрой" (КФТС)

THE FUNCTIONAL REANIMATION BEDS