Medical metal furniture. Functional beds, donor armchairs, massage tables, furniture for pediatrics and others
Home page\ Productions\ Medical Furniture, medical technique\ Functional Beds Russian version
Navigation
The two-section functional bed -" 5" ( - 2)
About the company
News
Productions

Medical Furniture, medical technique


Furniture for general using


Laboratory furniture



The price-list
Photo gallery
Contacts
Articles



@Mail.ru

The two-section functional bed  -" 5" ( - 2)

Functional Bed - 2

Beds are delivered on wheels, the first figure is the number of mobile units, and letters are the type of drive: - comb, - Screw, - electric lift (marked from the head section)

Functional Bed - 2 is for to create necessary conditions for the medical and prophylactic activities and for the convenience of service staff during the patient care

Functional Bed has two mobile units.

The bed consists of a base (power frame), a bed, two backs, drives. The base is made of round pipes of 38 and 22 mm in diameter and profiled pipes of 4025 mm. Four pintle wheels with the diameter of 125 mm are fastened to the base of the bed, Two of them are with brakes. The wheels are made of gray rubber, leaving no traces. In the head and foot part of the base the back with inserts from laminated wood chipboard are mounted. The mechanism of backs attachment lets quickly lift and install them (quick back).

Bed consists of three sections which are connected hingedly: back, hip, leg. Adjustment of sections to the horizontal:

  • Back section of 0 -75 degrees (comb, rastomat)
  • Leg Section 0 - 30 degrees (comb, rastomat)

Sections of the bed are made of square pipes of 2525 and welded wire grid with a diameter of 5 mm. the size of a cell is 100x50 mm. A bed supports to a frame comes through the polyethylene pads. Back part of the bed can be lifted with comb. The hip section of the bed is fixed and firmly hitched to the power frame. All metal parts of the bed are painted with white polymeric- powder paint. The bed has four corner bumpers.

Foot section is driven by the comb. All metal parts of the bed are painted with white polymeric - powder paint. The bed has four corner bumpers.

  • Dimensions: 2100 x 965 x 1080 mm
  • The mass of the bed is not more than 68 kg
  • Term of service - 10 years
  • The height of lying 550 mm
  • Package amount 0.4 cbm.

Additional set: rack for a dropper, side fences, support under a bad-pan, traction frame, Balkan frame, mattress for a functional two sectional bed

THE FUNCTIONAL BEDS -" 4" ()

THE FUNCTIONAL BEDS -" 5"()

THE FUNCTIONAL BEDS 3-""()

THE FUNCTIONAL REANIMATION BEDS

© 2007, JSC Tehstroi

Roslyakova-19, Bor, Russia
Tel/fax: +7 83159 21171, 22036
+7 83159 22012, 99349


www.tehstroi-nn.ru