Beds are delivered on wheels, the first figure is the number of mobile units, and letters are the type of drive: Ã - comb, Â - Screw, Ý - electric lift (marked from the head section)
Functional Bed ÊÔÑ – 2ÂÂ is forto create necessary conditions for the medical and prophylactic activities, and for the convenience of service staff while treatment the patient.
Functional Bed has two mobile units.
The bed consists of a base (power frame), a bed, two backs, drives. The base is made of round pipes of 38 and 22 mm in diameter and profiled pipes of 40x25 mm. Four pintle wheel with the diameter of 125 mm are fastened to the base of the bed, Two of them are with brakes. The wheels are made of gray rubber, leaving no traces. In the head and foot part of the base the back with inserts from laminated wood chipboard are mounted. The mechanism of backs attachment lets quickly lift and install them (quick back).
Bed consists of three sections which are connected hingedly: back, coxal, leg. Adjustment of sections to the horizontal:
- back section of 0 -75 degrees (screw)
- leg Section 0 - 30 degrees (screw)
Sections of the bed are made of square tubes of 25x25 and welded wire grid with a diameter of 5 mm., the size of a cell is 100x50 mm. A bed supports to a frame comes through the polyethylene pads. Back part of the bed can be lifted with a screw mechanism, which is made of steel and bronze, and is protected from overload (Antivandalny screw). The coxal section of the bed is fixed and firmly hitched to the power frame. Leg section is driven by screws. All metal parts of the bed are painted with white polymeric- powder paint. The bed has four corner bumpers.
- Overall dimensions: 2100x965x1080
- The height of lying 550 mm
- Maximum load - 180 kg
- The mass of the bed no more than - 51 kg
- Term of service - 10 years