Functional Bed КФС – 2ЭГ

Beds are delivered on wheels, the first figure is the number of mobile units, and letters are the type of drive: Г - comb, В - Screw, Э - electric lift (marked from the head section)

Functional Bed КФС – 2ЭГ is for to create necessary conditions for the medical and prophylactic activities, and for the convenience of service staff during the patient care.

Functional Bed has two mobile units.

The bed consists of a base (power frame), a bed, two backs, drives. The base is made of round pipes of 38 and 22 mm in diameter and profiled pipes of 40x25 mm. Four pintle wheels with the diameter of 125 mm are fastened to the base of the bed, Two of them are with brakes. The wheels are made of gray rubber, leaving no traces. In the head and foot part of the base the back with inserts from laminated wood chipboard are mounted. The mechanism of backs attachment lets quickly lift and install them (quick back). 

Bed consists of three sections which are connected hingedly: back, hip, leg. Adjustment of sections to the horizontal:  

• back section of 0 -75 degrees (Electric)
• leg Section 0 - 30 degrees (comb)

Sections of the bed are made of square tubes of 25х25 and welded wire grid with a diameter of 5 mm., the size of a cell is 100х50 mm. A bed supports to a frame comes through the polyethylene pads. Back part of the bed is raised with the help of electric drive "ILCON" with a remote control panel. Electric drive works from the network of alternating current at a frequency of 50 Hz with a nominal voltage of 220V and is for short-term deviations of the supply voltage + 10% of the nominal value. The coxal section of the bed is fixed and firmly hitched to the power frame. Leg section is driven by a comb mechanism. All metal parts of the bed are painted with white polymeric- powder paint. The bed has four corner bumpers.

• Overall dimensions 2100x965x1080 mm
• The height of lying 550 mm
• Max load 180 kg
• Package amount 0.4 cbm
• Mass of the bed is not more than 68 kg
• Average service 10 years

Additional equipment: rack for a dropper, side fences, support under a bad-pan, traction frame, Balkan frame, mattress for a functional two sectional bed

THE FUNCTIONAL BEDS КФ-"Техстрой 4" (КФТ) 

THE FUNCTIONAL BEDS КФ-"Техстрой 5" (КФС) 

THE FUNCTIONAL BEDS КФ3-"Техстрой" (КФТС)

THE FUNCTIONAL REANIMATION BEDS